We Serve:
Longmont, Niwot, Frederick, Firestone, Boulder, Erie, Louisville, Lafayette, Centennial, Denver and surrounding areas, Castle Rock, Superior, Lyons, Estes Park, Nederland, Johnstown, Fort Collins, Loveland, Berthoud, Windsor, Greeley, Kersey, Cheyenne, Brighton.
Advantage Stone Fabrication
31 Price Road, Longmont, CO 80501
Phone: (303) 678-8324
Fax: (303) 678-9130
Toll Free: (877) 851-2267
E-Mail: info@advantagestone.com
Please tell us about your next project.
Edge Detail
Countertop Installation Process (download)
• Stone choice - Pick a color or Price Group (download price groupings)
• Thickness of stone - (2cm = 3/4" +/- OR 3cm = 1-1/4" +/-)
• Edge detail - (2cm & 3cm / Laminates) (Edge Details)
With the right edge detail, your slab is sure to make a striking and lasting impression. Edges are available in a variety of thicknesses -- ranging from 2 cm and 3cm thick to 1 1/2" (laminated).
2 cm or 3 cm Thickness - Standard Edge
2 cm or 3 cm Thickness - Upgrade Edge
With the right edge detail, your slab is sure to make a striking and lasting impression. Edges are available in a variety of thicknesses -- ranging from 2 cm and 3cm thick to 1 1/2"(4cm) and even 2-1/2"(6cm) laminated).
1 1/2" or 2-1/2" Laminated
Straight Edge with Apron
• Backsplash (optional) - (examples) 4", 6", Full height or Tile
• Sink type - (top mount or under mount)
• Special cut outs - Cooktop, curves, corners etc.
• Drawing w/dimensions of countertops & finished edges given to ASF (drawing worksheet)
• Receive proposal from ASF
• Slab selection (optional- Click here to see our wholesalers websites)
• Deposit of 50% paid to ASF (allow 2-3 weeks to complete installation)
• On site visit for final templates by ASF (after cabinets installed)
• Stone Fabrication at ASF shop
• On site installation, final payment to ASF after installation approved
• Electrician/plumber needed to connect & plumb appliances & fixtures
For any other questions please contact us
______________________________________________________________
Fabrication Facility
Our 4,000 sf shop is one of the cleanest fabrication shops you will find in the industry. Our team members have many years of experience and take pride in their work. Come by and visit our shop to see what we are able to produce. Our shop spends most of there time fabricating granite and marble counter tops as part of our turn-key process to be installed by our field & installation team. We also spend a lot of time fabricating counter tops for other installers as well as cutting and fabricating sandstone for other stone suppliers and installers.
We are able to cut up to 12 inches of stone on our bridge saws and are capable of completing any & all edge work needed along with honing & polishing surfaces.
Please visit our shop and complete showroom; we will assist you in choosing the right stone for you.
Natural Stone Care & Maintenance
To insure your natural stone products will provide you with a lifetime of aesthetics and utility, a proper maintenance program is crucial. Natural Stone products are porous by nature and require a different maintenance program than traditional ceramic tile.
Natural stone requires a different maintenance routine than traditional, man-made ceramic tile. Many of the cleaners acceptable for use on ceramic tile can stain, damage or dull stone. Dirt and dust will scratch the surface of stone. Therefore, stone floors should be vacuumed or dust mopped frequently to remove abrasive agents from the stone surface. Natural stone should be cleaned with neutral cleaners. Stone cleaners should never contain acid or bleach. Acids, even a light solution of vinegar and water, will etch and eventually damage natural stone.
Stone Cleaners
Only use cleaners specifically designed for cleaning stone. These cleaners contain no acids and are concentrated neutral pH cleaners that will not affect existing sealers or wax-type coatings. The surface of the stone should be dampened with clear water. This will keep the cleaning solution on the surface so it can be effective. A solution of the cleaner and water mixed to manufacturer instructions should be applied to the stone surface with a sponge or mop. On walls, kitchen counters or vanity tops, a spray bottle can be used to apply the cleaning solution. Allow sitting for manufacturers specified amount of time (usually 3 to 5 minutes). Agitate with a sponge, synthetic mop, soft bristle brush or through the use of a floor-scrubbing machine. Mop up dirty solution and buff dry.
Once the stone has been cleaned, you can periodically apply a Spray-Buff wax-type floor finish to enhance the beauty and luster of polished stone (including countertops). Apply the finish with a spray applicator and buff immediately with a white nylon pad. Reapply as often as needed, depending on volume of surface traffic and consistency of routine maintenance program. This product is not designed to restore the original shine, but is intended to maintain and protect the original shine. This can be purchased from most Home Centers or through your local Professional Floor Covering Dealer.
Heavy-Duty Stone Cleaning
When some areas have been neglected, you will need to use a heavy-duty stone cleaner and degreaser to effectively remove dirt, grease, grime, waxes and floor finishes. These cleaning products are concentrated and designed to deep clean the stone without damaging it. Apply the solution of the cleaner and water mixed to manufacturer instructions to the stone surface with a sponge or mop. Allow setting for manufacturer-specified amount of time. Agitate with a sponge, synthetic mop, and soft bristle brush or through the use of a floor-scrubbing machine. Mop up dirty solution and buff dry. Be sure to change out the cleaning solution every 100 square feet to avoid reintroducing dirty water during the cleaning process. Rinse thoroughly with clean water when finished. After cleaning you may apply the Spray-Buff wax-type floor finish to enhance the natural shine.
Stain Removal
Stone poultice will remove stains and grout haze from stone. Poultice is a fine, nonacidic, absorptive clay cleaning powder that removes deep-set oil stains, grease and light cementitious grout haze from polished and unpolished natural stone.
CAUTION: Poultice may dull the shine of the polished stone. If this occurs you will need to use a marble polish to restore the natural shine.
Restoration
If a marble finish has become dull, scratched or etched, you can restore the natural shine through the use of a marble polish. Some marble polishes are available in kits. The process can be enhanced with the use of floor buffing machines. The process is generally a re-crystallization process to remove fine scratches and restore the original shine and polish to the stone. This is not an application of a topical sealer or wax to cover-up damaged or worn surfaces.
______________________________________________________________